Oppo Reno 10 series was launched in May, and since Oppo updates its Reno series every six months, it’s time for the Reno 11 series to launch. As per various reports, Oppo will launch the Reno 11 series in China on November 23. While there is no official announcement from the brand yet, the Oppo Reno 11 & Reno 11 Pro specifications were shared by Digital Chat Station on Weibo.
Oppo Reno 11 has a curved display with a hole punch cutout in the center, the same design as the Reno 9. The chip is the MediaTek Dimensity 8200, an upgrade over the Reno 10’s Snapdragon 778G. There is a 4,800mAh battery, up from 4,600mAh. The charging speed is reduced to 67W from 80W. The phone weighs 184g, and the thickness is 7.59mm/7.66mm. Finally, the triple camera setup on the rear includes a primary 50MP 1/2″ LYT600 sensor, a secondary 8MP Sony IMX355 sensor with an ultrawide lens, and a third 32MP Sony IMX709 sensor with a 2x telephoto lens.
For comparison, the Reno 10 had a 64MP primary sensor, an 8MP ultrawide, and a 32MP 2X telephoto. So, the main upgrade here seems to be the primary camera.
The Oppo Reno 11 Pro has the Snapdragon 8+ Gen 1 chipset, compared to the Dimensity 8200 in the Reno 10 Pro. There is LPDDR5X RAM and UFS 3.1 storage. The battery is smaller than the Reno 11 at 4,700mAh but larger than the Reno 10 Pro (4,600mAh). The phone supports 80W fast charging, down from 100W in the Reno 10 Pro.
The triple camera setup on the rear is the same as the vanilla model except for the primary camera, which has a better 1/1.56-inch 50MP Sony IMX890 sensor. The phone weighs 190g, and is 8.19mm/8.26mm thick.